SensorTran Calibration Module
|
The proprietary SensorTran Calibration Module (CM) is revolutionizing the deployment and use of DTS systems. The module is offered as an optional accessory to all SensorTran DTS Units. The CM creates a unique thermal profile with high and low temperature reference points which the DTS unit automatically recognizes as being generated by the CM. The DTS unit uses these temperature reference points for accuracy verification and self-calibration of the DTS. The temperature set-points are programmable by connection to a laptop PC or similar device via the RS232 interface. The CM contains heating and cooling elements controlled by thermocouples. These elements locally heat or cool coiled optical fiber which is either part of, or connected in-line to, the fiber probes. A switch allows the operator to switch the unit on/off if continuous operation is not required. Lights on the CM indicate that it is operating correctly and is achieving the required temperature. |
|
|
Calibration Module Product Data Sheet brochure |
| Products | | | See a Demo | | | Careers | | | Site Map | | | Contact | |
| © 2008. SensorTran. All Rights Reserved. | |||||||||